- High quality plastic housing.
- Three Modes of operation – Auto, Off and On Wireless operation.
- USB power adaptor with 10 foot cord.
- Adjustable sensitivity Activity LED.
The iVAC Pro Tool Plus unit is used to identify the powered on state of its associated power tool. The iVAC Pro Tool Plus is physically clamped to the power cord of the power tool. The method of detecting the status of the power tool is by means of sensing the magnetic field around the power cord when the power tool is turned on or off. The iVAC Pro Tool Plus is powered by 5VDC. This power is obtained from either a UL FCC approved AC to DC 5volt USB adaptor, or an associated iVAC Pro System unit. If a. iVAC Pro Tool Plus is in the Auto Mode when the associated power tool is powered on, the iVAC Pro Tool Plus will transmit an instruction, by means of a digital wireless signal, to the iVAC Pro Switch (sold separately) instructing it to turn on and apply power to the dust collector. When the power tool has been turned off, the 'iVAC Pro Tool Plus will transmit an instruction to the iVAC Pro Switch (sold separately) telling it to turn off. The range for radio communications between the iVAC Pro Tool Plus and the iVAC Pro Switch is forty feet. Features: Active current sense level is adjustable from approximately 0.3Amps or greater. Range, forty feet. Ambient operating temperature range, 0 - 30C Powered from a UL FCC approved AC to 5VDC Adaptor. Regulatory Compliance: FCC ID: YCH- IVACTP. IC: 8940A-IVACTP 5Volt 1Amp AC to DC Adaptor. UL and FCC approved.
- Is Discontinued By Manufacturer : No
- Product Dimensions : 6.7 x 4.9 x 2.9 inches; 4.8 ounces
- Date First Available : November 12, 2014
- Manufacturer : BCTINT Limited
- Country of Origin : China
